Tag Archives: enameled aluminum wire

Advantages and Applications of Xinyu Enameled Wire

Talking about the strengths of Enameled aluminum wire and its application field. Aluminum enameled wire has the following advantages DC resistivity: The DC resistivity of the copper clad aluminum wire is about 1.45 times that of the pure copper wire; the resistance phase together, the copper clad aluminum wire component. Outstanding solderability: The copper clad aluminum wire has the same congruence as the pure copper wire because of its concentric coating of pure copper. Brazability, not special treatment like aluminum wire; together, copper clad aluminum wire has a thick copper layer to ensure that when painting. Light weight: The copper clad aluminum wire density is 1/2.5 of the pure copper wire of the same wire diameter, which is very useful for the component of the falling coil. Replacing copper wire with Shenzhou copper-clad aluminum wire can save at least 30% of the cost.

Copper clad aluminum enameled wire application field

200 Enameled Copper Wire

1. High frequency transformers and general transformers;

2, inductance, electromagnetic coil;

3. The motor includes motors with high environmental requirements such as household motors, various micro motors and compressors;

4. Special electromagnetic wires for audio coils and optical drives;

5. Electromagnetic wire for display deflection coil;

6. Electromagnetic wire for degaussing coil;

Notes on the use of aluminum enameled wire

aluminum enameled wire is a signal transmission, but it is now a power transmission. It is very simple to question, and the life of its goods will be greatly reduced. In fact, in the use of aluminum enameled wire, pay attention to the oxidation maintenance of the undercut wire to ensure the useful connection between copper and aluminum, can be used for a long time.

There are many areas in which copper-clad aluminum wire and copper-clad aluminum enamel bags cannot be used. However, in fact, many companies use transformers, which is very worrying. The worry of the use of copper clad aluminum wire is 2 points, the self-resistance is higher than that of the cross-section copper, and the temperature rise is doubtful; the easy oxidation of aluminum wire will further increase the wire resistance and avoid oxidation.

The most worrying is the copper and aluminum in the Copper Enameled Wire, the metallurgical connection often said in the industry, the reliability in the long-term application process, in the process of thermal expansion and contraction, copper and aluminum contact can Whether it can withstand testing, there is no real proof in the industry.

Various Enameled Aluminum Wire from Xinyu

Currently, electronics manufacturing companies prefer to use Enameled aluminum wire instead of copper wire. The biggest disadvantage of using copper wire at home is the cost involved. When you need a lot of wiring, if you decide to use copper wire, you may have to spend a lot of money. On the other hand, aluminum wiring is more popular because it is lighter in weight. Compared to copper, its plasticity is much higher, which makes the aluminum wire easier to use. Since aluminum is an inexpensive alternative to copper, aluminum wire usually does not burn a hole in your pocket. The only drawback to this type of wiring is that it must be properly installed to avoid a fire. This is because when current passes through these wires, they expand during this process. It involves a lot of expansion and contraction. Therefore, the possibility of losing contact is great. When the wire is overheated, it may cause the fixture to melt and ignite.

Xinyu-enameledwire.com is one of the largest suppliers of painted copper wire, enameled wire and motor repair accessory products. Enameled wire (magnetic wire) is a key component in the motor and transformer manufacturing and repair industry. Enamel copper wire is an insulated copper wire (or aluminum) used in electric motors, transformers and other electromagnetic equipment. The magnet wire is a copper wire. It is just plain copper and a thin enamel coating that acts as an insulator. A thin coating means that when you are making an electromagnet or transformer, you can cover more of the coating around the core. It is this use of the wire that gives it its name.

Electrical, automotive, industrial machinery, residential and commercial HVAC systems require electrical machinery transfer. Magnetic wires are a key component of every application. When machine energy is converted to electrical energy, a process of mechanical conversion to electrical energy occurs. This type of conversion involves a generator that converts mechanical energy into electrical energy by using a magnet wire.